Tel:0086 18120033767
Wechat:0086 18120033767
Contact Person:MANAGER
PDF Show:PDF

Halogen Rapid Moisture AnalyzerIis mainly used to measure the water content of tea and other foods, with an accuracy of 0.01%. The moisture meter is small in size and fast in measurement, which is suitable for various tea plants
Flat type tea press shaping machine mainly for LongJing Tea, through the computer control program, the manual operation processes such as tea feeding, fixation, flat shaping, polishing are changed into computer control, so that the evenness of each batch of tea can be adjusted and controlled
DL-6CRT-75 tea rolling machine has double action, mainly for tea twisting, drum diameter 75cm, capacity about 120 kg per batch.
DL-6CQFJ-70 used for sorting fresh leaf which picked by tea harvester, can separate different sizes of tea for producing different grades of finished tea.
DL-CRQ-20Z CTC black tea HRS Gyrovane rotorvane machine mainly used for processing CTC black tea.
DL-6CYQT-90250 mainly used for Oolong tea processing, drum made of bamboo, the activity of withered tea was increased by shaking, It can make tea taste more fragrant, Capacity about 120 kg per batch.
DL-6CHL-RQ10 is small type tea drying machine, can drying for all kind tea, use gas heating, capacity from 40kg to 600kg per hour, temperature and speed adjustable, safety, energy saving and environmental protection
DL-6CHZ-9QB is full stainless steel tea dehydrator, electric heating, drying area about 10sqm, capacity 27-45 kg per batch.
DL-6CSTL-D60 for processing Green/Oolong tea, heating by electricity, drum diameter 60cm, length 300cm, speed and temperature adjustable. Capacitu about 100 kg per hour.
DESCRIPTION |
The electric heating continuous fixation machine is mainly used for batch production of green tea, oolong tea, herbal tea, Ivan tea, etc.
It has the advantages of controllable temperature, high production efficiency, and low labor costs.
This kind of fixation machine uses gas heating, using three stages of fire platters, the working temperature of each section can be adjusted. Because the tea fixation follows the order from high temperature to low temperature. Therefore, the tea made by this machine is more even, the green color is better, and the aroma is more sufficient.
The inner wall of the machine is made of 3.5mm thick steel plate, with a hot gas circulation device inside. The temperature changing inside the machine is small, small heat loss, and the energy-saving and more environmentally friendly.
Equipped with a water vapor discharge system to discharge hot and humid exhaust gas from the machine to make the tea color look good and avoid quality degradation.
ADVANTAGE |
1. Excellent heat insulation, heat preservation and energy saving.
2. The use of calcium silicate board increases the insulation effect.
3. Adopt a controllable water vapor discharge system to save energy.
4. Optimized deceleration system, the machine speed is stable, while ensuring that the torque is large enough and running smoothly.
5. Dense electric heating pipe surrounds the whole fixation drum to ensure the uniform heat of cylinder board, tea fixing more evenly.
6. Using 3.5mm ultra-thick steel plate, the temperature change is small and good heat preservation, the tea leaf will not be damaged, ( other factory only use 2mm steel plate )
APPLICATION |
Electric Heating Continuous Tea Fixing Machine is suitable for processing black / green / oolong / white / dark / herbal tea, the following is the working time required for the above tea production.
Type Of Tea | Working Time |
Green Tea | 4-6 Minutes |
Oolong Tea | 4-6 Minutes |
Herbal Tea | 4-6 Minutes |
The above data is for reference only, and the specific processing time shall be determined according to the actual situation.
SPECIFICATION |
Electric Heating Continuous Tea Fixing Machine specification list:
Model | DL-6CST-L60D | |
Dimension | 900×3500×1516 mm | |
Voltage | 380/50 V/Hz | |
Input power | 62 KW | |
Inner drum diameter | 600 mm | |
Inner drum length | 3000 mm | |
Drive motor | Power | 0.75 W |
Speed | 1400 rpm | |
Voltage | 380 V | |
Exhaust motor | Power | 370 W |
Speed | 1400 rpm | |
Voltage | 220 V | |
Drum speed | 5-37 rpm | |
Heating type | Electric heating wire | |
Efficiency | 100 kg/h |
Specification of all of Electric Heating Continuous Tea Fixing Machine.
Model | 6CSTL-D60 | 6CSTL-D80 |
Drum Diameter | 60 cm | 80 cm |
Drum Length | 300 cm | 400 cm |
Capacity | 100 kg/h | 200 kg/h |
If you have special need, it can be customized according to the needs of customers.
PHOTOS |
CONTACT |
If you are interested in this product, please contact us to get the price.
↑ ↑ Click the icon to get the latest price directly ↑ ↑
↓ ↓ You can also leave your contact information at the bottom. We usually contact you in about 10 minutes ↓ ↓
Tel:0086 18120033767
Wechat:0086 18120033767
Contact Person:MANAGER
PDF Show:PDF
Highly customized tea processing machine to meet your special needs, strictly product quality control is our requirement .