DL-6CQFJ-70 used for sorting fresh leaf which picked by tea harvester, can separate different sizes of tea for producing different grades of finished tea.
DL-CRQ-20Z CTC black tea HRS Gyrovane rotorvane machine mainly used for processing CTC black tea.
DL-6CYQT-90250 mainly used for Oolong tea processing, drum made of bamboo, the activity of withered tea was increased by shaking, It can make tea taste more fragrant, Capacity about 120 kg per batch.
DL-6CHL-RQ10 is small type tea drying machine, can drying for all kind tea, use gas heating, capacity from 40kg to 600kg per hour, temperature and speed adjustable, safety, energy saving and environmental protection
DL-6CHZ-9QB is full stainless steel tea dehydrator, electric heating, drying area about 10sqm, capacity 27-45 kg per batch.
DL-6CHZ-5 use electric heating, outer is baking paint inside is stainless steel trays, drying area 5sqm, capacity 15-25kg per batch.
DL-6CRT-65T can process almost all kind tea, brass type, the part contacted with tea is made of stainless steel, drum diameter 65cm, height 48cm, capacity about 60 kg per batch.
Circular vibrating screen separator mainly for sorting different size of tea dust/powder/fragment, used for CTC tea or other crushed tea leaf, Optional different screens to get different sizes of tea.
Modern pressed cake is supported by science, which proves that the pressed cake has more advantages than loose tea in the process of transformation.
The selection of history produced Pu'er tea cakes, but the unique shape of Pu'er tea has been preserved to this day due to its unique tea aroma.
Proper drying can fully reflect the aroma of Wuyi rock tea in the final stage, here is the more information of the drying.
DL-6CST-70QB mainly used for Green/Oolong/Yellow tea processing, inside drum diameter 70cm, length 100cm, use gas heating, speed and temperature adjustable. Capacity about 50 kg per hour.
The diameter of this Tea Leaf Steaming Machine is 70cm, and the length of the inner straight section is 1000mm. Using 220V/380V voltage, it can process 5 kg of fresh leaves per batch.
Tea fixation machine can used for processing green tea, oolong tea and herbal tea, the step of fixation is mainly used for the production of various unfermented or semi-fermented teas. The activity of the enzyme in the fresh leaves is reduced by high temperature, the tea polyphenols in the fresh leaves are stopped for oxidative fermentation, and the odor of the grass is removed, the aroma of the tea leaves is excited, and the moisture in the fresh leaves is evaporated. The fresh leaves become softer, which is conducive to the subsequent rolling process, and the tea leaves are not easily damaged.
|①||Control Pannel||⑧||Heat Sink|
|④||Inner Barrel||⑪||Balance bolt|
|⑤||Support Wheel||⑫||Reduction cylinder|
|⑥||Ignition Switch||⑬||Combustion Zone|
|⑦||Bottom Wheel||⑭||Support Frame|
1. The inner barrel is super thick and has good structural optimization.
2. Integrated microcomputer control system, the fixation time can be intelligently controlled.
3. Adopt dual temperature control design, ensure the precise control of temperature and ensure the quality of tea.
4. Top cooling switch design, after tea roasting processing, open the cooling valve, can accelerate heat dissipation.
5. Automatic solenoid valve design, heating automatically starts and stops, the solenoid valve automatically closes when the temperature reaches the set temperature, and the machine stops heating. When the temperature is lower than the set temperature, the solenoid valve opens and the machine reheats, which can save fuel.
Tea Leaf Steaming Machine is suitable for processing green / oolong / herbal tea, the following is the working time required for the above tea production.
|Type Of Tea||Working Time|
|Green Tea||4-8 Minutes|
|Oolong Tea||4-8 Minutes|
|Herbal Tea||4-8 Minutes|
The above data is for reference only, and the specific processing time shall be determined according to the actual situation.
Green Tea Leaf Steaming Machine specification list:
|Drum inner diameter||700 mm|
|Drum inner length||1000 mm|
|Drive motor||Power||0.75 KW|
|Exhaust fan||Power||85 W|
|Drum speed||5-37 rpm|
|Heating type||Liquid gas|
|Capacity per time||5 kg/batch|
Specification of all of Green Tea Steaming Process Machine.
|Drum Diameter||50 cm||70 cm||90 cm||100 cm|
|Drum Length||60 cm||100 cm||124 cm||125 cm|
|Capacity||25 kg/h||50 kg/h||100 kg/h||150 kg/h|
If you have special need, it can be customized according to the needs of customers.
Adopt dual temperature control design, ensure the precise control of temperature and ensure the quality of tea.
Using 2.5mm ultra-thick steel plate, the temperature change is small and good heat preservation, the tea leaf will not be damaged, ( other factory only use 1.6mm steel plate )
T-shaped combustion fire platoon covering the tea fixation barrel, burning area up to 100%.
The inner barrel uses a new type of environmentally friendly fireproof insulation material, thickness up to 20mm, greatly reduces heat loss and saves energy by 30%.
Double ignition needles and fully automatic ignition coils ensure 100% successful ignition and no waste of fuel.
If you are interested in this product, please contact us to get the price.
↑ ↑ Click the icon to get the latest price directly ↑ ↑
↓ ↓ You can also leave your contact information at the bottom. We usually contact you in about 10 minutes ↓ ↓
Highly customized tea processing machine to meet your special needs, strictly product quality control is our requirement .