DL-6CHZ-34 use electric heating, it has 2 racks 36 layers 110cm round pallets, rotary drying, Intelligent temperature control, drying area about 34m², capacity 100-170 kg per batch.
DL-6CHZ-Q18 use electric and gas heating together, heating rate increased by 40%, more energy saving, it has 16 layers 120cm trays, capacity about 55-90 kg per batch.
DL-6CHZ-14 use electric heating, it has 16 layers 110cm round pallets, rotary drying, Intelligent temperature control, drying area about 14.5m², capacity 60-75 kg per batch.
DL-6CFZ-999 manual filling machine can fill 1-999 gram materials, made of all stainless steel, simple operation, fast weighing, better use with manual sealer
DL-3CXP-110 use MITSUBISHI TU33 2 stroke engine, power 1.0kw 1.25HP, displacement 32.6cc, with 1140mm stright blade, suitable for flat tea garden pruning, more efficient pruning.
This tea pouch packaging machine is suitable for automatic packaging of all kinds of tea. It is mainly used for packaging plastic tea bags with the packaging range of 1-50g.
DL-6CHZ-9 use electric heating, it has 16 layers 90cm round pallets, rotary drying, Intelligent temperature control, drying area about 9m², capacity 27-36 kg per batch.
DL-6CHZ-5 use electric heating, it has 14 layers 70cm round pallets, rotary drying, Intelligent temperature control, drying area about 5m², capacity 15-20 kg per batch.
This technology mainly addresses the problems of uneven withering of fresh leaves in the process of black tea processing, the withering process is restricted by the natural environment, the withering time is too long, and the entire process is expensive.
The location of the primary tea factory should be comprehensively considered in terms of transportation, water sources, environment, employment, raw materials, and topography. Before building a factory, the surrounding environment and geology should be in
The types of tea fixation machines include drum fixation machines, steam heating fixation machines, hot air fixation machines, steaming fixation machines, etc. Can be purchased according to the following factors. (1) Purchasing according to the interna
Shaking and withering are both parts of the fermentation. During the withering process of oolong tea, because the leaves are calmly placed, a lot of water will only evaporate from the leaves, and the water in the leaf stalks is not lost, which will lead t
Oolong tea is a unique existence among all teas. It belongs to a kind of semi-fermented tea. This kind of tea is processed through multiple processes such as drying, drying and shaking, as well as finishing and rolling, and the finished product is process
Black tea leaves contain a variety of water-soluble chemical substances, including tea polyphenols, caffeine, sugars, amino acids, proteins, fruit acids, aromatic substances, etc.
The purpose of tea rolling is to make the initial shape, and to break the leaf cells to increase the flavor concentration of the finished tea. In green tea processing, except for a few famous green teas, rolling is generally an indispensable process.
The purpose of black tea fermentation is to promote profound changes in the contents and prepare a substrate for the formation of the unique color, aroma and taste qualities of black tea.
According to China Customs statistics, in September 2020, China’s tea export volume was 29,100 tons
Green tea fixation processing is the key to green tea processing. The purpose of fixation is to use high temperature to quickly destroy the activity of enzymes, prevent the oxidation of polyphenols, and maintain the green color
The purpose of tea rolling step is to make the shape initially, and to break the leaf cells to improve the taste concentration of finished tea. In the processing of green tea, in addition to a few famous green tea, rolling is generally an indispensable pr
After the fresh leaves are spread, the quality of the leaves becomes soft and emits a delicate fragrance. Generally, the moisture content reaches about 70% (the weight loss rate is about 15% to 20%), which is moderate, and can enter the next process.
Black tea withering refers to the process in which the fresh leaves entering the plant will lose water for a period of time, so that certain hard and brittle stems and leaves are wilted and withered.
The chain plate diesel drying machine is suitable for continuous line tea production, which greatly saves labor costs. It uses high-quality diesel burners and high-efficiency heat exchange devices, with small heat loss and fast machine heating. With three high-power high-air-flow motors, It can quickly exhaust the hot and humid air inside the machine, and it also has a hot air circulation device, which can effectively reduce the temperature change inside the machine and greatly save fuel costs.
The machine is heated by diesel oil and a 250-liter large-capacity fuel tank is provided for free. The measured fuel consumption per hour of the machine is only 6.5 liters / hour (24 square meters), and the fuel cost is extremely low.
The machine can adjust the air volume and drying time for different tea production, ensure that the tea is completely dried.And optimize the internal structure, low noise,when the material is dropped, the smallest damage to the tea. Make sure that the good color of the tea,good flavor,high quality.
This machine can not only dry tea but also various foods such as fruits, vegetables, meat, seafood, etc.Supports custom stainless steel styles and custom machine sizes as needed.
1. The diesel engine imported from Japan is used with precise computer program control to ensure that the fuel is fully burned, achieving the highest thermal efficiency, energy saving and environmental protection;
2.Using the latest hot gas recovery technology, mechanical heating fast, heat loss is small;
3.Using the latest CNC punching technology, the mesh is flat, the air permeability is good, the water vapor transmission speed is fast, the water in the tank does not accumulate, ensuring that the color of the drying material is more fresh green;
4.The whole machine is strong, the appearance is generous, the lines are tough, the new ultra-low hopper design, stable and practical, easy to dump, high work efficiency; at the same time with high-quality parts, new microcomputer automatic control, easy to operate, stable quality It saves time and effort, and is the ideal machine for drying your materials.
Belt Type Tea Leaf Dryer is suitable for processing black / green / oolong / white / dark / herbal tea, the following is the working time required for the above tea production.
|Type Of Tea||Working Time|
|Black Tea||10-30 Minutes|
|Green Tea||10-30 Minutes|
|White Tea||10-30 Minutes|
|Oolong Tea||10-30 Minutes|
|Herbal Tea||10-30 Minutes|
The above data is for reference only, and the specific processing time shall be determined according to the actual situation.
Diesel Heating Belt Type Tea Leaf Dryer specification list:
|Voltage||220V / 380V|
|Drying area||20 m2|
|Drying plate later||6|
|Drying time||8-90 minutes|
|Heating element||Diesel burner|
|Fan motor||Power||2.2 KW|
|Drive motor||Power||1.5 KW|
|Feed motor||Power||0.55 kw|
|Moisture content of wet tea||≈ 50%|
|Moisture content of dried tea||≤5%|
|Weight loss per m² per hour||6 kg|
|Capacity for wet tea||250 kg/h|
|Capacity for dried tea||140 kg/h|
Specification of all of Diesel Heating Belt Type Tea Leaf Dryer .
|6CHL-CY10||10 m2||120 kg/h||70 kg/h|
|6CHL-CY16||16 m2||200 kg/h||110 kg/h|
|6CHL-CY20||20 m2||250 kg/h||140 kg/h|
|6CHL-CY24||24 m2||300 kg/h||165 kg/h|
|6CHL-CY30||30 m2||370 kg/h||200 kg/h|
|6CHL-CY32||32 m2||400 kg/h||220 kg/h|
|6CHL-CY40||40 m2||490 kg/h||270 kg/h|
|6CHL-CY50||50 m2||610 kg/h||330 kg/h|
|6CHL-CY60||60 m²||735 kg/h||400 kg/h|
The above data source: our local loose leaf tea, moisture content of wet tea : ≈ 50%, moisture content of dried tea : ≤5%.
If you have special need, it can be customized according to the needs of customers.