DL-6CHL-RQ10 is small type tea drying machine, can drying for all kind tea, use gas heating, capacity from 60kg to 400kg per hour, temperature and speed adjustable, safety, energy saving and environmental protection
DL-6CHZ-9QB is full stainless steel tea dehydrator, electric heating, drying area about 10sqm, capacity 27-45 kg per batch.
DL-6CHZ-5 use electric heating, outer is baking paint inside is stainless steel trays, drying area 5sqm, capacity 15-25kg per batch.
DL-6CRT-65T can process almost all kind tea, brass type, the part contacted with tea is made of stainless steel, drum diameter 65cm, height 48cm, capacity about 60 kg per batch.
Circular vibrating screen separator mainly for sorting different size of tea dust/powder/fragment, used for CTC tea or other crushed tea leaf, Optional different screens to get different sizes of tea.
100kg fresh leaves process 25kg finished oolong tea in 12 hours, This page recommends you a full set of green tea production equipment and use methods.
The matcha stone mill is made of granite that is cut in one piece. After the initial grinding process, no stone powder or slag is lost during use, which ensures the safety and cleanliness of the matcha tea.
The main function of the electric bamboo drum baking cage is to replace the carbon baking cage, making the drying of tea more precise and controllable.
Black tea is the fully fermented tea, the most important part of the producton process is fermentation. Fermentation is to make the grass smell in the tea disapper. The substances inside the black tea are in full contact with the air. Under suitable conditions of temperature and humidity, the polyphenol compounds in the tea are fermented and oxidized to form theaflavins, thearubins,etc. And let the black tea emit a unique aroma.
Normally, the fermentation time of black tea should not be too long. Because during drying, the tea will continue to ferment during the temperature increase phase.
Usually, there are two methods of fermetation, natural fermentation and fermentation machine fermentation (fermentation room fermentation).
Because the fermentation of black tea require the slightly higher temperature, high humidity and reconstituted oxygen, natural fermetation is usually selected in a breathable container such as bamboo baskets and woonden frames. The thickness of the tea paving is about 10cm, sprinkle with a little clean water, and then cover it with a thin quilt to keep the fermentation tempeature of black tea between 30-35 degrees. If the fermentation temperature exceeds 40 degrees, the tea leaves need to be mixed to dissipate heat to prevent the fermentation from being too intense, the fragrance of the tea leaves to become light, and the color to be dark. In high-temperature weather, it is necessary to observe the state of the tea frequently to aviod damaging the quality of the tea. Advantage: Low cost, black tea can be processed without extra cost. Disadvantage: Due to the hot and humid processing environment, the quilt is used for a long time to breed bacteria and affect the tea; Moreover, it is necessary to constantly observe the changes of the tea leaves, the quality of the tea leaves cannot be controlled, and it is easy to make low-quality tea leaves. Wasting time, wasting artificially and wasting tea leaves.
The intelligent black tea fermentiton equipment is mainly used for the fermentiton of black tea and dark tea. With advanced intelligent control box, it can intelligently adjust the temperature and humidity inside the machine, and the fermentation time can be controlled . It is an essential equipment for the production of high-end black tea! The inside of the machine is made of all stainless steel to ensure that black tea is not contaminated during the production process. With the advanced intelligent atomization system, it can ensure that every layer of tea can be fermentated evenly, and the quality of each batch of tea is the same. So that the production of high-end fine black tea can be accurately copied in batches! Advantage: The tea is evenly fermentated, the temperature and the humidity can be controlled, automatic alarm at the end of processing. The stainless steel structure is clean and hygienic, and the produced black tea has the same quality, which is an indispensable equipment for the high-end black tea.