DL-6CHL-RQ10 is small type tea drying machine, can drying for all kind tea, use gas heating, capacity from 60kg to 400kg per hour, temperature and speed adjustable, safety, energy saving and environmental protection
DL-6CHZ-9QB is full stainless steel tea dehydrator, electric heating, drying area about 10sqm, capacity 27-45 kg per batch.
DL-6CHZ-5 use electric heating, outer is baking paint inside is stainless steel trays, drying area 5sqm, capacity 15-25kg per batch.
DL-6CRT-65T can process almost all kind tea, brass type, the part contacted with tea is made of stainless steel, drum diameter 65cm, height 48cm, capacity about 60 kg per batch.
Circular vibrating screen separator mainly for sorting different size of tea dust/powder/fragment, used for CTC tea or other crushed tea leaf, Optional different screens to get different sizes of tea.
100kg fresh leaves process 25kg finished oolong tea in 12 hours, This page recommends you a full set of green tea production equipment and use methods.
The matcha stone mill is made of granite that is cut in one piece. After the initial grinding process, no stone powder or slag is lost during use, which ensures the safety and cleanliness of the matcha tea.
The main function of the electric bamboo drum baking cage is to replace the carbon baking cage, making the drying of tea more precise and controllable.
Mechanical tea picking must use the correct method to make the tea tree grow better. At the same time, the fresh leaves after picking must be properly insured and stored.
For the better growth of tea leaves, during the tea picking process, attention should be paid to the tea plucking techniques and picking methods.
The standard of tea picking should follow the standard of processed tea, taking into account the problems of leaf retention and harvesting.
The picking of fresh leaves is not only related to the quality, yield, and economic benefits of the finished tea, but also to the growth and economic life of the tea tree. Therefore, in the tea production process, the picking of fresh tea is of special importance, and the picking must be timely.
Chinese tea farmers have a proverb that three days early harvest is a treasure, and three days late harvest is grass. That is to say, the tea leaves must be picked in time. The finished tea produced by the early leaves is of high quality, and the later the fresh tea is made, the worse the quality of the finished tea. In addition, timely picking can promote the timely germination of new tea leaves, shorten the interval, greatly increase the frequency of tea picking, achieve the effect of increasing production and income, and can also reduce the pests and diseases of tea leaves.
According to the method of picking, tea picking is usually divided into hand-picked tea and mechanical tea picking.
Hand-picked tea is the most traditional method of picking fresh leaves. Picking by hand should be carried out, and pick the fresh tea leaves one by one speparately, not to grab all of them by hands.
Advantages: The standard of tea leaves is unified (for example, only buds are picked, and only one bud and two leaves are picked), which is easy to grasp.
Disadvantages: time-consuming and laborious, high cost of tea picking. If the tea garden area is large, it is difficult to pick in time.
Several types of mechanical tea picking currently used:
1. Backpack-type single man tea picking machine. Mainly for small and medium-sized tea gardens.
2. Double-men tea harvester machine is mainly for medium and large tea gardens.
3. Electric tea picking machine is mainly for small tea gardens.