DL-6CHZ-34 use electric heating, it has 2 racks 36 layers 110cm round pallets, rotary drying, Intelligent temperature control, drying area about 34m², capacity 100-170 kg per batch.
DL-6CHZ-Q18 use electric and gas heating together, heating rate increased by 40%, more energy saving, it has 16 layers 120cm trays, capacity about 55-90 kg per batch.
DL-6CHZ-14 use electric heating, it has 16 layers 110cm round pallets, rotary drying, Intelligent temperature control, drying area about 14.5m², capacity 60-75 kg per batch.
DL-6CFZ-999 manual filling machine can fill 1-999 gram materials, made of all stainless steel, simple operation, fast weighing, better use with manual sealer
DL-3CXP-110 use MITSUBISHI TU33 2 stroke engine, power 1.0kw 1.25HP, displacement 32.6cc, with 1140mm stright blade, suitable for flat tea garden pruning, more efficient pruning.
This tea pouch packaging machine is suitable for automatic packaging of all kinds of tea. It is mainly used for packaging plastic tea bags with the packaging range of 1-50g.
DL-6CHZ-9 use electric heating, it has 16 layers 90cm round pallets, rotary drying, Intelligent temperature control, drying area about 9m², capacity 27-36 kg per batch.
DL-6CHZ-5 use electric heating, it has 14 layers 70cm round pallets, rotary drying, Intelligent temperature control, drying area about 5m², capacity 15-20 kg per batch.
DESCRIPTION |
This gas heating Tea Roasting Pot highly imitates the process of manual tea roasting; the industry's first pot can rotate 360 degrees, the tea is heated without dead corners, and the fixation is more uniform.
We are the first company in the industry to install hot air pipes on the pot body. You can choose whether to blow hot air into the machine. The hot air can quickly drain the water vapor from the pot to prevent the tea from being stuffed and affecting the tea quality.
The tea made from this machine has almost the same taste as the tea made by an experienced teacher. If you want to produce high-quality tea, this machine can greatly improve the quality of your tea.
This machine uses gas heating, energy-saving, and environmental protection, and the thickness of the steel plate is 6mm. The quality of the tea is even, which is completely close to the tea produced by hand. It is an ideal machine for producing high grade tea!
ADVANTAGE |
1. T-shaped combustion fire platoon covering the tea fixation barrel, burning area up to 100%.
2. There are three valves at the bottom, which can be manually ignited in case of power failure, so tea leaves are not wasted.
3. Automatic solenoid valve design, heating automatically starts and stops, the solenoid valve automatically closes when the temperature reaches the set temperature, and the machine stops heating. When the temperature is lower than the set temperature, the solenoid valve opens and the machine reheats, which can save fuel.
4. Preserve the design of the combustion head of the constant burning flame, reserve the constant burning flame after the ignition is successful, re-ignite from the constant burning flame, reduce the pressure of the ignition needle and the ignition coil, and improve the service life.
APPLICATION |
Tea Roasting Pot is suitable for processing black / green / oolong / white / dark / herbal tea, the following is the working time required for the above tea production.
Type Of Tea | Working Time |
Green Tea | 15-20 Minutes |
Oolong Tea | 15-20 Minutes |
Herbal Tea | 15-20 Minutes |
The above data is for reference only, and the specific processing time shall be determined according to the actual situation.
SPECIFICATION |
Gas Heating Tea Roasting Pot specification list:
Model | DL-6CSTG-100 | |
Dimension | 1300×1780×1550 mm | |
Voltage | 220/50 V/Hz | |
Pot inner diameter | 1000 mm | |
Pot inner depth | 950 mm | |
Drive motor | Power | 0.5 KW |
Speed | 1400 rpm | |
Voltage | 220 V | |
Pot speed | 5-37 rpm | |
Heating type | Gas | |
Efficiency | 20 kg/batch |
If you have special need, it can be customized according to the needs of customers.
PHOTOS |
Highly customized tea processing machine to meet your special needs, strictly product quality control is our requirement .