Halogen Rapid Moisture AnalyzerIis mainly used to measure the water content of tea and other foods, with an accuracy of 0.01%. The moisture meter is small in size and fast in measurement, which is suitable for various tea plants
Flat type tea press shaping machine mainly for LongJing Tea, through the computer control program, the manual operation processes such as tea feeding, fixation, flat shaping, polishing are changed into computer control, so that the evenness of each batch of tea can be adjusted and controlled
DL-6CRT-75 tea rolling machine has double action, mainly for tea twisting, drum diameter 75cm, capacity about 120 kg per batch.
DL-6CQFJ-70 used for sorting fresh leaf which picked by tea harvester, can separate different sizes of tea for producing different grades of finished tea.
DL-CRQ-20Z CTC black tea HRS Gyrovane rotorvane machine mainly used for processing CTC black tea.
DL-6CYQT-90250 mainly used for Oolong tea processing, drum made of bamboo, the activity of withered tea was increased by shaking, It can make tea taste more fragrant, Capacity about 120 kg per batch.
DL-6CHL-RQ10 is small type tea drying machine, can drying for all kind tea, use gas heating, capacity from 40kg to 600kg per hour, temperature and speed adjustable, safety, energy saving and environmental protection
DL-6CHZ-9QB is full stainless steel tea dehydrator, electric heating, drying area about 10sqm, capacity 27-45 kg per batch.
DL-6CST-D70 mainly used for Green/Oolong/Yellow tea processing, inside drum diameter 70cm, length 100cm, use electric heating, speed and temperature adjustable. Capacity about 50 kg per hour.
DESCRIPTION |
The diameter of this model is 70cm, and the length of the inner straight section is 1000mm. Using 380V voltage, it can process 50 kg of fresh leaves each hour.
Pneumatic shock absorber design, the machine automatically falls back, and the falling speed is stable, the inner barrel uses a new type of environmentally friendly fireproof insulation material, thickness up to 20mm, greatly reduces heat loss and saves energy by 30%, an exhaust fan is added to the rear, which can be turned on and off manually, which can quickly blow away the hot and humid air inside the machine to prevent the tea from being stuffy and affecting the taste.
ADVANTAGE |
① | Control Pannel | ⑦ | Temperature Sensor |
② | Thermometer | ⑧ | Electric Heating Tube |
③ | Outer Barrel | ⑨ | Balance Bolt |
④ | Inner Barrel | ⑩ | Handle |
⑤ | Support Wheel | ⑪ | Combustion Zone |
⑥ | Bottom Wheel | ⑫ | Support Frame |
ADVANTAGE |
1. Using calcium silicate board, increasing the heat preservation effect and meeting the food hygiene requirements;
2. There is a handle on the drum, which can be manually roasting in case of a sudden power failure, so that the tea is not wasted.
3. Intelligent temperature control system, easy to operate and precise control;
4. Optimized deceleration system, the machine speed is stable, while ensuring that the torque is large enough and running smoothly.
5. Adopt dual temperature control design, ensure the precise control of temperature and ensure the quality of tea.
6. More controllable water vapor emission system for more energy saving.
APPLICATION |
Electric Heating Green Tea Panning Machine is suitable for processing green / oolong / herbal tea, the following is the working time required for the above tea production.
Type Of Tea | Working Time |
Green Tea | 4-8 Minutes |
Oolong Tea | 4-8 Minutes |
Herbal Tea | 4-8 Minutes |
The above data is for reference only, and the specific processing time shall be determined according to the actual situation.
SPECIFICATION |
Electric Heating Green Tea Panning Machine specification list:
Model | DL-6CST-D70 | |
Dimensions | 980×1565×1630 mm | |
Voltage | 380/50 V/Hz | |
Drum inner diameter | 700 mm | |
Drum inner length | 1000 mm | |
Heating power | 24 KW | |
Drive motor | Power | 0.75 KW |
Speed | 1390 rpm | |
Voltage | 220 V | |
Exhaust fan | Power | 85 W |
Speed | 2200 rpm | |
Voltage | 220 V | |
Drum speed | 5-37 min | |
Heating type | Electric heating | |
Efficiency | 50 kg/h |
Specification of all of Electric Heating Green Tea Panning Machine.
Model | 6CST-D50 | 6CST-D70 |
Drum Diameter | 50 cm | 70 cm |
Drum Length | 60 cm | 100 cm |
Capacity | 25 kg/h | 50 kg/h |
If you have special need, it can be customized according to the needs of customers.
DETAILS |
Dense electric heating pipe surrounds the whole fixation drum to ensure the uniform heat of cylinder board, tea fixing more evenly.
Integrated microcomputer control system, the fixation time can be intelligently controlled.
When tea fixation, the speed of the machine can be adjusted, according to the tea of different producing areas, different speed can be adjusted.
Top cooling switch design, after tea roasting processing, open the cooling valve, can accelerate heat dissipation.
The inner barrel uses a new type of environmentally friendly fireproof insulation material, thickness up to 20mm, greatly reduces heat loss and saves energy by 30%.
PHOTOS |
CONTACT |
If you are interested in this product, please contact us to get the price.
↑ ↑ Click the icon to get the latest price directly ↑ ↑
↓ ↓ You can also leave your contact information at the bottom. We usually contact you in about 10 minutes ↓ ↓