DL-6CHL-RQ10 is small type tea drying machine, can drying for all kind tea, use gas heating, capacity from 60kg to 400kg per hour, temperature and speed adjustable, safety, energy saving and environmental protection
DL-6CHZ-9QB is full stainless steel tea dehydrator, electric heating, drying area about 10sqm, capacity 27-45 kg per batch.
DL-6CHZ-5 use electric heating, outer is baking paint inside is stainless steel trays, drying area 5sqm, capacity 15-25kg per batch.
DL-6CRT-65T can process almost all kind tea, brass type, the part contacted with tea is made of stainless steel, drum diameter 65cm, height 48cm, capacity about 60 kg per batch.
Circular vibrating screen separator mainly for sorting different size of tea dust/powder/fragment, used for CTC tea or other crushed tea leaf, Optional different screens to get different sizes of tea.
100kg fresh leaves process 25kg finished oolong tea in 12 hours, This page recommends you a full set of green tea production equipment and use methods.
The matcha stone mill is made of granite that is cut in one piece. After the initial grinding process, no stone powder or slag is lost during use, which ensures the safety and cleanliness of the matcha tea.
The main function of the electric bamboo drum baking cage is to replace the carbon baking cage, making the drying of tea more precise and controllable.
Before the round type tea ball made, the raw tea still need to process by tea withering machine, tea fixation machine, tea roller and tea dryer.Then shaping by the dragon te ball shaping machine.
Before shaping the dargon ball tea, the raw tea still need to make thoug tea withering, tea fixaiton, tea roling and tea drying.
Doing a good job in tea garden management can make the value of spring tea more enhanced.
Black tea fermentation has traditional fermentation and machine fermentation, and machine fermentation will become a trend of black tea fermentation.
DL-4C-T use MITSUBISHI TU26 2 stroke gasoline engine, power 0,7kw 0.9HP, displacement 25.4cc, cutting width 45/50/60cm, 1 hour can pick about 500-600kg tea leaf.
The Gasoline Tea Leaf Cutting Machine is mainly used for tea picking in mountain, hilly, plain and other terrain. It is produced with international advanced technology. It has the advantages of low noise, large air volume, stable quality and high production efficiency. It is an ideal machine for tea picking.
4C-T Gasoline Tea Cutting Machine using our own engine MITSUBISHI 2 stroke, 25.4 CC, 0.7KW gasoline engine, output power is larger than 4 stroke, please note that the ratio of engine oil to gasoline is 25:1. The performance is more stable, and the high temperature does not extinguish. Tea picking is more efficient and efficiency is 40 times that of manual labor.
1. The structure of the blowpipe is optimized. The air volume of each duct is uniform and the wind is more stronger, tea leaf into tea bags faster.
2. Each set of tea picking machine is free of charge with a 6-meter long nylon cloth bag, which is wear-resistant and durable. The bag has a tie rope, and the working length canbe adjusted arbitrarily.
3. Gasoline Tea Cutting Machine after 20 years of continuous optimization and improvement, now all parts are produced by ourselves, we ensure that every part is of the best quality, and the service life is increased by 100% compared with peers!
4. Custom widened and thickened shoulder strap. The width of the strap is widened by 30% and the thickness is increased by 20%. The back board is natural against the waist and conforms to ergonomics, the shoulder and waist will not ache during use.
Independently designed fan blade and fan cover, plastic fan and aluminum fan are available for higher strength and more sufficient air volume
Since eight years ago, we were not satisfied with using gearbox accessories of the same poor quality as other peers. We spent hundreds of thousands of dollars to build our own gearbox components, which increased the life of the machine by 100%
SK5 carbon tool steel has been quenched with high hardness and strong wear resistance. It can cut 1 cm thick branch directly.
For the tea producing areas with large leaves and the special needs of picking lavender and other flower, we have developed a new type of increased turret, which is 10 cm higher than the conventional one, which greatly improves the picking efficiency.
Petrol Opereted Tea Plucking Machine specification list:
|Cutting Width||40/50/60 cm|
|Engine Model||MITSUBISHI TU26|
Specification of all of Gasoline Tea Harvester Machine.
|DL-4C-H3||HONDA GX35||4 Stroke||1.35 KW|
|DL-4C-H2||HONDA GX25||4 Stroke||0.81 KW|
|DL-4C-Z||KOMATSU G26LS||2 Stroke||0.81 KW|
|DL-4C-T||MITSUBISHI TU26||2 Stroke||0.7 KW|
|DL-4C-S||HUASHENG 1E34F||2 Stroke||0.7 KW|
|DL-4C-A||NATIKA 1E34F||2 Stroke||0.7 KW|
|DL-4C-S39||HUASHENG 139FA||4 Stroke||0.7 KW|
If you have special need, it can be customized according to the needs of customers.
If you are interested in this product, please contact us to get the price.
↑ ↑ Click the icon to get the latest price directly ↑ ↑
↓ ↓ You can also leave your contact information at the bottom. We usually contact you in about 10 minutes ↓ ↓