DL-6CHL-RQ10 is small type tea drying machine, can drying for all kind tea, use gas heating, capacity from 60kg to 400kg per hour, temperature and speed adjustable, safety, energy saving and environmental protection
DL-6CHZ-9QB is full stainless steel tea dehydrator, electric heating, drying area about 10sqm, capacity 27-45 kg per batch.
DL-6CHZ-5 use electric heating, outer is baking paint inside is stainless steel trays, drying area 5sqm, capacity 15-25kg per batch.
DL-6CRT-65T can process almost all kind tea, brass type, the part contacted with tea is made of stainless steel, drum diameter 65cm, height 48cm, capacity about 60 kg per batch.
Circular vibrating screen separator mainly for sorting different size of tea dust/powder/fragment, used for CTC tea or other crushed tea leaf, Optional different screens to get different sizes of tea.
100kg fresh leaves process 25kg finished oolong tea in 12 hours, This page recommends you a full set of green tea production equipment and use methods.
The matcha stone mill is made of granite that is cut in one piece. After the initial grinding process, no stone powder or slag is lost during use, which ensures the safety and cleanliness of the matcha tea.
The main function of the electric bamboo drum baking cage is to replace the carbon baking cage, making the drying of tea more precise and controllable.
During the high temperature period in summer, attention should be paid to shading, sun protection and irrigation, so as to ensure the normal growth and development of tea trees and ensure the quality of tea leaves.
Under normal circumstances, the tolerance of shrub-type tea varieties is stronger than that of tree-type tea trees, and the low-temperature tolerance of medium- and small-leaf tea trees is stronger than that of large-leaf tea trees.
The right temperature is conducive to promoting the healthy growth of tea trees, let us see more!
The fermentation of tea is actually a kind of biological oxidation, and tea leaves with different degrees of fermentation are obtained by different transformations of the contained substances.
DL-6CFJ-120QB made of all stainless steel, it's beautiful, sanitary and clean, humidity and temperature can be controlled intelligently, and tea fermentation is more uniform. It has 2 doors, 8 layers, each layer has 4pcs large stainless steel tray, total has 32pcs layers, capacity about 250kg per batch.
Intelligent black tea fermentation equipment is mainly used for the fermentation of black tea. It has an advanced intelligent control box, which can intelligently adjust the temperature and humidity inside the machine, and the fermentation time can be controlled. It is essential equipment for producing a high quality of black tea!!
The inside of the machine is made of full stainless steel to ensure that black tea is not polluted during the production process. With the advanced intelligent atomization system, it can ensure that each layer of tea can be fermented uniformly, and the quality of each batch of tea is the same. Production can be accurately copied in batches!
|①||Control Pannel||⑤||Atomization Water Tank|
1. The inner tank and trays are designed with stainless steel, which is clean and hygienic.
2. The door is lined with high-temperature resistant elastic rubber strips, which can seal the door of the machine to prevent hot air and water mist from escaping.
3. The high-frequency ultrasonic atomizer can atomize the water into very small droplets, which can enter the tea and improve the uniformity of fermentation.
4. The water tank with atomizer is installed on the top, and the atomized water mist naturally fills the inside of the tea fermentation machine, and the fermentation is more uniform.
Electric Tea Fermentation Processing Machine is suitable for processing black / green / oolong / white / dark / herbal tea, the following is the working time required for the above tea production.
|Type Of Tea||Working Time|
|Black Tea||2-6 Hours|
|Dark Tea||12-24 Hours|
|Herbal Tea||2-6 Hours|
The above data is for reference only, and the specific processing time shall be determined according to the actual situation.
Electric Tea Fermentation Processing Machine specification list:
|Heating mode||Heating wire|
|Heating power||6.0 KW|
|Heating group||1 Group|
|Tray size||720×520×100 mm|
|Tray quantity||32 pcs|
Specification of all of Electric Tea Fermentation Processing Machine.
|Power||3 kw||6 kw||6 kw||9 kw|
|Capacity||60 kg||150 kg||250 kg||350 kg|
If you have special need, it can be customized according to the needs of customers.
Integrated microcomputer control system, temperature and humidity can be intelligently controlled.
The solenoid valve design ensures that the water in the tank is kept at the best atomization height.
Using high-strength steel hinges and door handles, the service life of the machine is increased by 40% compared with other companies.
The door is lined with high-temperature resistant elastic rubber strips, which can seal the door of the machine to prevent hot air and water mist from escaping.
If you are interested in this product, please contact us to get the price.
↑ ↑ Click the icon to get the latest price directly ↑ ↑
↓ ↓ You can also leave your contact information at the bottom. We usually contact you in about 10 minutes ↓ ↓
Highly customized tea processing machine to meet your special needs, strictly product quality control is our requirement .