DL-6CHZ-34 use electric heating, it has 2 racks 36 layers 110cm round pallets, rotary drying, Intelligent temperature control, drying area about 34m², capacity 100-170 kg per batch.
DL-6CHZ-Q18 use electric and gas heating together, heating rate increased by 40%, more energy saving, it has 16 layers 120cm trays, capacity about 55-90 kg per batch.
DL-6CHZ-14 use electric heating, it has 16 layers 110cm round pallets, rotary drying, Intelligent temperature control, drying area about 14.5m², capacity 60-75 kg per batch.
DL-6CFZ-999 manual filling machine can fill 1-999 gram materials, made of all stainless steel, simple operation, fast weighing, better use with manual sealer
DL-3CXP-110 use MITSUBISHI TU33 2 stroke engine, power 1.0kw 1.25HP, displacement 32.6cc, with 1140mm stright blade, suitable for flat tea garden pruning, more efficient pruning.
This tea pouch packaging machine is suitable for automatic packaging of all kinds of tea. It is mainly used for packaging plastic tea bags with the packaging range of 1-50g.
DL-6CHZ-9 use electric heating, it has 16 layers 90cm round pallets, rotary drying, Intelligent temperature control, drying area about 9m², capacity 27-36 kg per batch.
DL-6CHZ-5 use electric heating, it has 14 layers 70cm round pallets, rotary drying, Intelligent temperature control, drying area about 5m², capacity 15-20 kg per batch.
The purpose of tea rolling is to make the initial shape, and to break the leaf cells to increase the flavor concentration of the finished tea. In green tea processing, except for a few famous green teas, rolling is generally an indispensable process.
Common failures, causes and solutions of tea kneading machines:
(1) The kneading bucket does not rotate or reverse. The reason for the non-rotation is that the head screw between the active crank arm and the active shaft is loose, and the motor output V-belt is loose and slipping. The reason for the reverse rotation is the wrong three-phase electrical connection of the motor. The solutions are: tighten the head screw, tighten or replace the V-belt; exchange any two input power cables of the motor.
(2) The running noise is loud. The reasons include insufficient lubricating oil in the gear reducer, wear of the gears in the reducer, and the motor fan touching the shell. The solutions are: add enough lubricating oil, replace gears, and adjust the fan housing;
(3) The kneading lid of the single-arm kneading machine collides with the kneading barrel. The reasons are that the fastening bolts at the lower end of the single-arm column are loose, and the connecting screws between the gland and the gland are loose. The solution is: tighten the loose screw.